Measurement Group (GQoSM)

Scopemon is configured via parameters. This reference lists all available parameters, default values, allowed values, and examples for GQoSM configuration.

1. qoe_gqosm_cbl_form #

The form factor for connection break length.

  • Precision: float
  • Minimum: 0.0
  • Maximum: 1.0
  • Default: 0.3
Ignored if use_qoe_gqosm_cbl is false

Example

[Measurement]
use_qoe_gqosm_cbl=true
qoe_gqosm_cbl_form=0.4

2. qoe_gqosm_cbl_threshold #

Bad performance limit for connection break length.

  • Unit: packets
  • Precision: integer
  • Minimum: 0
  • Default: 5
Ignored if use_qoe_gqosm_cbl is false

Example

[Measurement]
use_qoe_gqosm_cbl=true
qoe_gqosm_cbl_threshold=2

3. qoe_gqosm_delay_form #

The form factor for the delay.

  • Precision: float
  • Minimum: 0.0
  • Maximum: 1.0
  • Default: 0.3
Ignored if use_qoe_gqosm_delay is false

Example

[Measurement]
use_qoe_gqosm_delay=true
qoe_gqosm_delay_form=0.4

4. qoe_gqosm_delay_threshold #

Bad performance limit for the delay.

  • Unit: seconds
  • Precision: float
  • Minimum: 0.0
  • Default: 0.3
Ignored if use_qoe_gqosm_delay is false

Example

[Measurement]
use_qoe_gqosm_delay=true
qoe_gqosm_delay_threshold=0.5

5. qoe_gqosm_jitter_form #

The form factor for jitter.

  • Precision: float
  • Minimum: 0.0
  • Maximum: 1.0
  • Default: 0.3
Ignored if use_qoe_gqosm_jitter is false

Example

[Measurement]
use_qoe_gqosm_jitter=true
qoe_gqosm_jitter_form=0.1

6. qoe_gqosm_jitter_threshold #

Bad performance limit for jitter.

  • Unit: seconds
  • Precision: float
  • Minimum: 0.0
  • Default: 0.1
Ignored if use_qoe_gqosm_jitter is false

Example

[Measurement]
use_qoe_gqosm_jitter=true
qoe_gqosm_jitter_threshold=0.07

7. qoe_gqosm_packet_loss_form #

The form factor for packet loss.

  • Precision: float
  • Minimum: 0.0
  • Maximum: 1.0
  • Default: 0.3
Ignored if use_qoe_gqosm_packet_loss is false

Example

[Measurement]
use_qoe_gqosm_packet_loss=true
qoe_gqosm_packet_loss_form=0.4

8. qoe_gqosm_packet_loss_threshold #

Bad performance limit for packet loss.

  • Unit: fraction
  • Precision: float
  • Minimum: 0.0
  • Maximum: 1.0
  • Default: 0.03
Ignored if use_qoe_gqosm_packet_loss is false

Example

[Measurement]
use_qoe_gqosm_packet_loss=true
qoe_gqosm_packet_loss_threshold=0.08

9. use_qoe_gqosm #

Determines if GQoSM quality model calculations are performed. When false, GQoSM results are not available in results.

  • Values:
    • true - GQoSM quality model is calculated
    • false - GQoSM quality model is not calculated
  • Default: true

Example

[Measurement]
use_qoe_gqosm=true

10. use_qoe_gqosm_cbl #

Determines if connection break length parameter should be used in quality assessment.

  • Values:
    • true - Parameter is used
    • false - Parameter is not used
  • Default: false

Example

[Measurement]
use_qoe_gqosm_cbl=true

11. use_qoe_gqosm_delay #

Determines if delay parameter should be used in quality assessment.

  • Values:
    • true - Parameter is used
    • false - Parameter is not used
  • Default: true

Example

[Measurement]
use_qoe_gqosm_delay=false

12. use_qoe_gqosm_jitter #

Determines if jitter parameter should be used in quality assessment.

  • Values:
    • true - Parameter is used
    • false - Parameter is not used
  • Default: true

Example

[Measurement]
use_qoe_gqosm_jitter=false

13. use_qoe_gqosm_packet_loss #

Determines if packet loss parameter should be used in quality assessment.

  • Values:
    • true - Parameter is used
    • false - Parameter is not used
  • Default: true

Example

[Measurement]
use_qoe_gqosm_packet_loss=false